SMT terminal block 46.121.1002.50

push-insingle-pole

Product information "SMD Push through terminal block - 1 pole" No tools required! Wires can be released by twisting and pulling the wire simultaneously. Terminal block and ballast on same working level Suitable for metal core PCBs Note 1: Maximum thickness of PCB and heatsink should not exceed 3.6 mm Note 2: Recommendation for opening in heatsink is shown with minimum diameter. For other shaped pockets in heatsink the minimum creepage and clearance distances and manufacturing tolerances have to be considered. Note 3: Recommended dimension for opening in PCB Note 4: Recommended dimension for solder mask Note 5: The minimum creepage distance has to be guaranteed, depends on the application. Note 6: Recommended pick & place area #1 Note 7: Recommended pick & place area #2 inside of the connector. Max. diameter of nozzle is 2.5 mm. Note 8: Distance from center of mass to pick and place area #1 and #2 General note: It is recommended to make an electrical connection between both poles of each polarity on the solder mask Other packaging units on request