Flooring system PERMAT

BLANKE PERMAT protects tiles and saves time and money. For use as a reinforcing underlayment for tile and stone in industrial and private environments on all substrates – from new and old screeds to wood floors – and also combinable with a wide variety of tile formats. Thanks to the glass fibre mesh and multilayer structure the system boasts high adhesive bonding values as well as resistance to bending, tensile and compressive loads. This allows floorings to be laid earlier, as any deflections in shape are not transferred to the upper floor covering; in addition, it is the key product for the floor systems BLANKE PERMATOP and BLANKE PERMATFLOOR. guarantees maximum safety for your building project saves a lot of time and money (i. e. upon renovations) no cavities, no hollow sound, high tensile strength can be used in rooms with a traffic load up to 7.5 kN/m2 high point load resistant because of solid fixing Apply an appropriate thin-set mortar according to DIN EN 12004 AND DIN EN 12002 S 1 to the well prepared substrate and comb on using a notched trowel 6x6 mm. Cut the plates of Blanke PERMAT to the requested size and and embed the fleece underside (white side down) into the thin-set mortar so that the entire fleece side is well bonded. Abut the plates tight to each other. All mats have a glass fibre mesh overhang on two adjoining sides of approx. 3,0 cm. After the thin-set mortar has been cured,