Automatic cardboard box/case erector FP-4/2M series

hot-melt gluepneumatic

Synchronization: The machine is equipped with two motors, each with its own drive but controlled by the same PLC. This allows us to move from the lower rate of production to the highest rate without any adjustment. Hopper: The ergonomic design of the machine and its loader means that all operations can be done from floor level without steps or platforms. Zero Point:  The machine incorporates a clutch system on the introduction motor which keeps the “0” point in case of cardboard jams. Automatic Compensation:  when changing machine speed the glue lines are automatically adjusted so that they are always in the correct place and the correct length. Optional on all versions: Double wall kit in board feed direction available. Hot Melt Timer: lets you program the glue equipment daily at an appointed time. It also has a standby function that will cut in when the machine has not run for a predeterminated time to reduce the temperature of the glue tank automatically. Touch screen:  the machine has a colour screen for programming which allows: program selection, change of designs and sizes, language selection, maintenance, problem identification, production statistics, etc. allowing to control all machine processes. Double Wall Kit:  All three versions can form the double wall in the board feed direction. Upgrade:  There is an upgrade kit that transforms both an FP-4/2M1 or an FP-4/2M2 in an FP-4/2M3. Security:  all safety devices are double circuit CE safety level “C”. Evaporator: mounted inside the machine to ensure a uniform flow, capable of a high production without any vibration.