Hydraulic pelletiser HP 500

The new pelletising process with an established track record. The Hydropellet flat-matrix press HP 500 introduces pioneering innovations for automatic pelletising/granulation in production facilities with a wide range of materials. For a uniform dosage of the material, the self-developed round silo with discharge cone and seamless discharge screw is used with frequency and performance controlled output. The technical data: Drive motor 30/37 KW Hydraulic drive unit Matrixes diameter 600mm Crimping diameter 250 mm Matrix aperture diameter 4-16 mm Width of the mat: Working width/Spreading width (281/445mm) Throughput - 500 kg/h input (bulk density and pellet diameter dependent) Weight approx. 1800 kg Automatic distance adjustment The automatic distance adjustment of the roller wheels to the matrix surface enables the material to be transferred, the friction process (with heat factor) to be compacted from the matrix holes and the quality of the pellets to be changed during operation. This frictional displacement makes it possible to save moulds significantly by eliminating the need for a suitable pellet quality. With the automatic distance adjustment, a granulating process can be performed, which produces a homogeneous final granulate from various input granules, a factor which is important for pellet and granule quality. Due to the friction conditions, material decompositions of composite materials are made possible which are otherwise hard to achieve. The latter process takes place predominantly with short matrix apertures of 10-16 mm.