Measurement microphone 4193

externally-polarizedfrequencypolarized

Low frequency microphone Type 4193 is designed for infrasound measurements over a frequency range of 0.07 Hz to 20 kHz. The microphone is externally polarized and must be used with a classical preamplifier. Type 4193 Low Frequency Microphone is built for making infrasound measurement in ship engine rooms, in helicopters and in wind-buffeted buildings, due to its extremely low cut-off frequency. When used with Infrasound Adaptor UC-0211, the lower limiting frequency of the preamplifier is reduced to 0.1 Hz. USER SCENARIOS Pressure-field microphones are optimised to have a flat frequency response in a pressure field, and work well for making measurements in small, closed couplers or close to hard, reflective surfaces. The microphone is an ideal choice when making: Infrasound (infrasonic) measurements Sonic boom measurements General pressure field measurements STABILITY A press-fitted, stainless-steel diaphragm ensure superior long-term stability and mechanical robustness – Type 4193 will withstand the 1 m drop test of IEC 6006-2-32. POLARIZATION VOLTAGE Type 4193 requires an external polarization voltage and must therefore must be used with a classical preamplifier. External polarized microphones may be used at higher temperatures without severe changes in sensitivity. TEDS MICROPHONES This microphone cartridge is available as a Infrasound Microphone Set with the classical Preamplifier Type 2669 built-in.The TEDS microphone has been sealed in a clean environment. The TEDS is programmed with the loaded sensitivity of the actual cartridge and the data is therefore readily available.