*mydirectindustry

One-way roller clutch USNU series
without internal bearingsindexingbackstop

One-way roller clutch - USNU series - C.T.S. - without internal bearings / indexing / backstop

Add to favorites

Compare this product

Go to the C.T.S. website for more information

Characteristics

Technology

roller

Construction

without internal bearings

Applications

backstop, overrunning clutch, indexing

Other characteristics

low-speed, irreversible

Torque

Max.: 7,250 Nm
(5,347.3256 ft.lb)

Min.: 12 Nm
(8.8507 ft.lb)

Diameter

Max.: 100 mm
(3.94 in)

Min.: 8 mm
(0.31 in)

Rotational speed

Max.: 5,000 rpm
(31,415.93 rad.min-1)

Min.: 450 rpm
(2,827.43 rad.min-1)

Description

The USNU Series freewheels are not self-centering. It is therefore necessary to place one or two bearings next to the freewheel so that the outer race can rotate centrally to the inner race. USNU freewheels have ball bearings with the same dimensions as the 63.. series. The torque forces are transmitted from the shaft to the inner race by means of a key and from the outer race to the seating by means of front pullers or by means of an interference fit if the seating tolerance is made a K6. Shaft tolerance must be either h6 or j7; the tolerances for the seating must be either H7 or F7. When front pullers are not used, the seating tolerance should be K6. Before being put onto service, the freewheels must be lubricated with suitable lubricants following the instructions given on page 12. Oil lubrication is essential when a high number of rotations in neutral is reached.