Stylus pen DeoxIT® SHIELD, #S100P

DeoxIT® Shield S-Series provides long-lasting protection on metal surfaces in severe environments. It is NOT a cleaner, protects, lubricates and maintains optimum conductivity on all metal connectors and contacts. Recommended pre-cleaning with DeoxIT® D-Series contact cleaner or other cleaning method for best protection. Use on NEW metal surfaces, usually in the manufacturing process. It is also ideal where high degrees of pollution (sulfur, salts, acids, etc.) are present. For reference, DeoxIT® Shield has 0.0% cleaning action. Use on clean surfaces only. KEY FEATURES: Ideal for severe environments (humidity, salts, pollutants, sulfur, etc.) Excellent protection, good conductivity enhancing, excellent lubrication Reduces Intermittent Connections Reduces Arcing & RFI Reduces Wear & Abrasion Provides NO Cleaning * Temperature Range, -34 C (-29 F) to +210 C (410 F) Contact/Connector Protector – Ideal for Severe Environments! 100% Liquid, No Solvents, 6.0 mL Applicator: Pen, provides NO flushing action, applies 100% DeoxIT® Shield, replaceable tips. Formulation: 100% DeoxIT® Shield. Use: When contact and connector are easily accessible. No flushing action. First Time Use: Depress tip on a surface for a minute or two until liquid flows. Pull out tip and reverse to speed up activating. Notes: Use when over spray is an issue. Formulation safe on plastics. Always recommend testing for compatibility, especially on critical/sensitive parts, and vintage equipment with aging ABS plastic(s). Will not swell rubber.