Hoist ring with swivel C810X series

threaded

Anchorage point used to lift loads with through holes and/or threaded dead holes. - Safety coefficient 4 in all loading directions - Designed, tested and certified in compliance with the technical directives GS-OA 15-04 - EN 1677 - Suitable for safe lifting in compliance with the machinery directive 2006/42/EC - Can be oriented at 360° - Tested at 100 % magnaflux - Tested at 20.000 fatigue cycles - Cylinder head screw with hexagonal slot cl. 10.9 with variable length in compliance with directive UNI5931-DIN912 - We recommend the use of a washer DIN 6340 with appropriate dimensions to apply against the nut. - On the axial pull there can be variation of +/-5° with a 10% decrease in capacity - If the eyebolt is installed against the nut it has to be high and the through hole has to be on the part to be lifted with a diameter maximum with respect to the nominal diameter of the screw used - When using a counter-nut, check that, once installed, both the base of the device and the counter nut are totally in contact with the surface of the part to be lifted.