Vacuum plunger

Steam jet vacuum pump group Function Device or set of static devices which make it possible to obtain a vacuum in an enclosure according to the needs of a process. Principle When the needs of the installation require a high compression ratio and the suction pressure requested is lower than a value of the order of 150 mbar, it is necessary to put several ejectors in series. Each ejector represents an installation floor and bears the floor number. In the majority of cases, to avoid recompression of the vapor from the previous stage in a multi-stage installation, it is necessary to condense the vapor at the outlet of the ejectors by one or more Carbonite® condensers. Our offer Independent ejectors in Carbonite® or plastic materials (from DN20 to DN300) Supplies of intermediate condensate recovery units Calculation and optimization of components Manufacture of Ejectors Manufacture of Carbonite® Condensers Grouping of all the components, production of the connecting pipes and the frame Assembly and commissioning on site Abilities Gas flow: from 2.5 kg/h up to 100 kg/h (air) Residual pressure up to 1 millibar Steam output: from 55 kg/h up to 800 kg/h Cooling water flow: from 4m3/h up to 42 m3/h Benefits Perfect resistance to corrosion Working fluid: vapor or non-viscous liquid Temperature of aspirated fluids: up to 200°C Motor fluid pressure: up to 10 bar effective Possible installation in TAEX area