500 x 500 mm mechanically clamped RTM test panel tool with a sophisticated screw adjustable cavity thickness mechanism.
Features include:
-The lower mould is fixed with a moveable peripheral flange place which allows depth adjustment
-The upper face consists of 25 mm heat toughened glass plate in a supporting steel framework to maintain accuracy at positive pressures
-The upper mould is also available is machined aluminum if upper mould heating or high precision is required
-Injection is via a peripheral injection gate with a central vent or vice versa
-The lower mould and peripheral flange can be specified with fluid heating channels or integral electrical heating with the appropriate insulation
-The glass upper face is hinged and supported on gas struts for ease of operation
-A high temperature air ejector system is included with standard specification
Universal Sensor Positions
• Machined ports in the tool so it can accept an in-mould pressure sensor (IMPS) or thermocouple (T/C)
• Blanking plugs are included to blank off the machined holes when not in use
• Up to 4 universal sensor positions are available for IMPS and/or T/C's
High Temperature Air Ejector
-In-mould high temperature air ejector designed to provide maximum air-flow with minimum interference with the mould surface
-Designed to be fitted into either composite or metal tooling
-Included as standard with all options
2 Litre Catch-Pot
-2 litre inline catch-pot assembly with 1 x GEKA fitting
-Designed to be used for vacuum connection
-Included as standard with all options