Condition monitoring system Trendmaster® Pro

temperaturepressurevibration

Trendmaster Pro is an innovative online vibration monitoring system that links hundreds of permanently mounted transducers and measurement points to a single-cable sensor network. It then transmits full-waveform & spectrum data to our System 1 software, with its intuitive interface for tracking, alerting & analyzing your machinery behavior. This online condition monitoring system is optimized for cost-effective monitoring of machines of intermediate criticality, i.e. machines that don't demand immediate shut-down protection, but for which monthly portables-based monitoring would be insufficient. A highlight of this system is its suitability for use in the most hazardous environments (i.e. explosive gases). A wide range of sensor types are supported, including vibration (Acceleration, Velocity, Displacement), temperature (RTD & K thermocouple), Pressure, Process Variables (20mA, 5V), Rack Buffered outputs. Each Transducer Interface Module provides 2 channels of measurement. The Trendmaster Pro online condition monitoring system is ideal for your medium criticality machines: • Dynamic Scanning Modules - Strategically placed throughout your plant, DSMs accept one to six sensor bus cables to produce a distributed network of condition monitoring sensors. • Frequently polled - Sensors on each bus are polled sequentially every few minutes, allowing the system to collect data from thousands of connected sensor points. • Low installation and hardware costs - innovative architecture utilizes point-to-point wiring rather than running all field wiring all the way back to a central location.