Analog I/O module DP-34044-1-200

digitalCANopenCAN

The xtremeDB -1 (pronounced: "dash one") CANopen module combines many different I/O signal configurations. It offers a total of eight inputs, up to four of which can be parameterized in analog mode. Two of the digital inputs can also be configured as frequency inputs or counters. At the same time, the module offers eight outputs, which can also be individually configured as digital, PWM or current controlled PWMi outputs. The module can drive up to 26 A output current. Mechanical Data Dimensions - 97 x 265 x 34 mm Weight - 680 g Material (Housing) - PA, reinforced Power Connector - DT-18 (A-cod.) IO connector - DT-4 Electrical Data Operating Voltage - 8 … 32 V DC Operating Current per Contact / Potential (max.) - 13 A Sum Current (max.) - 26 A Supply Protection - Reverse polarity protection Block diagnoses - Undervoltage | Overvoltage | Overtemperature LED Indicators - Power: blue | Bus: green | Status: green | Actuator Power: blue | Signal: yellow | Error: red Inputs Range analog value - 4...20 mA | 0…5 V / 0…10 V / 0…32 V Number of frequency inputs FRQ - 2 Frequency Range - 10...3.000 Hz Input diagnoses - Undervoltage | overvoltage | short circuit Outputs DO output current max. - 4 A PWM output current max. - 4 A PWM(i) output current max. - 4 A Output Protection - Overload | Short Circuit Output Diagnoses - Actual Current | Overcurrent | Short Circuit Environmental Conditions Ambient temperature - -40 °C…+80 °C Storage temperature - -40 °C…+85 °C Suitable For: - CCpilot V1200, xtremeDBmini, CCpilot V700, CCpilot V1000 Product Family: - xtremeDB Port Number: - 8 Connection: - DT-4, DT-18 Baudrate: - 250, 500 kbit/s Input Signal Type: - DI, DI/AI, DI/FRQ/CNT