Internal-toothed slewing ring 2x seriesball bearingsingle-rowprecision
Add to favorites
Compare this product
Characteristics
- Teeth
- internal-toothed
- Rolling element
- ball bearing
- Geometry
- single-row
- Other characteristics
- precision
- Inner diameter
Max.: 986 mm
(38.82 in)Min.: 325 mm
(12.8 in)- Outer diameter
Max.: 1,198 mm
(47.165 in)Min.: 518 mm
(20.394 in)- Number of teeth
Max.: 125 unit
Min.: 67 unit
- Module
5 mm, 6 mm, 8 mm
(0.2 in, 0.24 in, 0.31 in)- Fixation hole diameter
Max.: 1,170 mm
(46.1 in)Min.: 490 mm
(19.3 in)- Number of fastening holes on the outer ring
8 mm, 10 mm, 12 mm, 14 mm, 16 mm
(0.31 in, 0.39 in, 0.47 in, 0.55 in, 0.63 in)- Number of fastening holes on the inner ring
Max.: 24 mm
(0.94 in)Min.: 12 mm
(0.47 in)
Description
Standard light series ball slewing ring with internal gear with an average raceway diameter from 411 to 1,091 mm
These slewing rings are not recommended for hanging loads. Vertical use must be limited due to clearance. These ball slewing bearings are also available without drilled holes, with identical part numbers, but differentiated by the last two characters:
• - 00: without fastening holes
• - 01: standard drilling
L-shaped profile slewing rings have rough surfaces except for the mounting surfaces.
L-shaped light series slewing rings can be used for all low-load applications, without vibration or the need for precision.
There are 3 different gear run-outs levels for each family (standard, low, very low).
Catalogs
Other DEFONTAINE - ROLLIX products
Light Series Ball Slewing Rings
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.