Slewing ring without teeth 2x series
ball bearingsingle-rowprecision

Slewing ring without teeth - 2x series - DEFONTAINE - ROLLIX - ball bearing / single-row / precision

Add to favorites

Compare this product

Go to the DEFONTAINE - ROLLIX website for more information

Characteristics

Teeth

without teeth

Rolling element

ball bearing

Geometry

single-row

Other characteristics

precision

Inner diameter

Max.: 984 mm
(38.74 in)

Min.: 304 mm
(11.97 in)

Outer diameter

Max.: 1,198 mm
(47.165 in)

Min.: 518 mm
(20.394 in)

Fixation hole diameter

Max.: 1,170 mm
(46.1 in)

Min.: 490 mm
(19.3 in)

Number of fastening holes on the outer ring

8 mm, 10 mm, 12 mm, 14 mm, 16 mm
(0.31 in, 0.39 in, 0.47 in, 0.55 in, 0.63 in)

Number of fastening holes on the inner ring

12 mm, 14 mm, 16 mm, 18 mm, 20 mm
(0.47 in, 0.55 in, 0.63 in, 0.71 in, 0.79 in)

Description

Standard light series ball slewing ring without gear with an average raceway diameter from 411 to 1,091 mm These slewing rings are not recommended for hanging loads. Vertical use must be limited due to clearance. These ball slewing bearings are also available without drilled holes, with identical part numbers, but differentiated by the last two characters: • - 00: without fastening holes • - 01: standard drilling L-shaped profile slewing rings have rough surfaces except for the mounting surfaces. L-shaped light series slewing rings can be used for all low-load applications, without vibration or the need for precision. There are 3 different gear run-outs levels for each family (standard, low, very low).