Belt conveyor

rollerspiralinclined

Power 220V. 50-60 HZ single-phase -External signal for the motion (robot contact) -Electronic protection against overcharge The drive rollers and idle rollers are in extruded aluminium and mounted on high-strength bearings, the drive roller has an anti-slip coating, for heavier uses it is coated in caoutchouc or it is splined in the centre. Inclined Conveyor normally installed at the side of the operating machine for unloading into containers or working bench or for filling/evacuating granulator. The belt can be combined with the rolls separators or spiral. It is usually mounted on wheels, but if large size is also mounted on fixed structures. installed with PU smooth strips, supergrip belt, when used to load granulator or evacuation is recommended to use the belt strips with spondaflex. Conveyor Articulated Below as used to be joined to the presses. With the lower flat elongated suitably is inserted into the press compartment or under the unloading of the blow molding machines. The inclined portion is adjustable to accommodate as much as possible to the discharge height, and can be of different lengths. On the exhaust can be fitted with rollers or spiral separators. It can install any type of belts, smooth, supergrip plugs, spondaflex or for high temperature. Conveyor Articulated High mainly used to unload the pieces taken from Robot or manipulators. Progress is often controlled by the robot that makes advancing step by step to let cool down pieces deposited. It ‘s mounted on wheels, but also on feet adjustable, it is recommended that the point of deposit of the pieces is fenced by a guard.