Non-contact transducer V002-E6.3/F6.3

analog

The selection of a suitable torque transducer is a basic requirement for the adjustment, monitoring and inspection of screwdrivers, and also for the testing of screw joints and screw joint analysis. Here are several examples for the use of the most suitable measurement device for processing reliability requirements: Example 1: An operator always assembles the same type of screw using a DEPRAG pneumatic screwdriver. Through the driver shut-off when the preset torque is reached, the assembly is controlled and assured to be accurate. In certain intervals, the screwdrivers are cross-checked using torque-transducers and if deviations occur, re-adjustments can be made. Measurement platforms which are intended for stationary use in a measurement laboratory or on a mobile measurement station are suitable for this test. Example 2: In a fully automatic assembly station, the regular testing of stationary screwdrivers is necessary. The DEPRAG torque wrenches in straight and angle-design, allow the mobile use when testing screwdriver-spindles without their removal from an assembly station. The torque-wrenches can also be used for the re-tightening or loosening of already assembled fastener.