Industrial vacuum cleaner M 100 JET CLEAN®
drywetsingle-phase

industrial vacuum cleaner
industrial vacuum cleaner
industrial vacuum cleaner
industrial vacuum cleaner
industrial vacuum cleaner
industrial vacuum cleaner
industrial vacuum cleaner
industrial vacuum cleaner
Add to favorites
Compare this product
 

Characteristics

Domain
industrial
Type
dry, wet
Power source
single-phase
Number of motors
3-motor
Configuration
mobile
Applications
for grinding/sanding/polishing machines
Power

3,900 W
(13,307.35 BTU/h)

Capacity

100 l
(26.4 gal)

Air flow

570 m³/h
(20,129.4 ft³/h)

Vacuum

250 mbar
(4 psi)

Noise level

72 dB

Weight

80 kg
(176.37 lb)

Height

1,515 mm
(59.6 in)

Length

800 mm
(31.5 in)

Width

660 mm
(26 in)

Description

The M100 Jet Clean® LP is the most powerful cyclonic industrial vacuum cleaner of the single-phase series in Depureco's range. Thanks to the 3 By-Pass motors it is possible to reach the impressive power of 3.9 kW. The M65/100 Jet Clean® industrial vacuum cleaner works in all conditions: dust, chips, liquids difficult materials with hoses as long as several meters. As standard this vacuum cleaner is equipped with a 35,000 cm2 PTFE filter certified Class M by the BIA (Berufsgenossenschaftliches Institut für Arbeitssicherheit) with a filtration efficiency of 1 µ. The JetClean® filter cleaning system allows the filter to be cleaned using the pressure differential between the inside and outside of the vacuum cleaner. The tangential inlet and protective jacket of the filter cartridge allow the cyclonic effect of dust to be used to slow it down and drop it inside the container, protecting the filter. The M100 Jet Clean® LP vacuum cleaner is equipped with a Longopac system where The vacuumed material is automatically bagged. The product automatically falls into a high-strength transparent plastic disposable bag. The volume of the bag is decided by the operator who will seal and cut it without having contact with the sucked material. This makes it possible to work with fine and hazardous powders while ensuring the safety of the operator. SUCTION UNIT The vacuum is generated by 3 by-pass motors. Each motor is managed by an independent switch, permitting the operator to control the intake performance. The motors are located in a sturdy casing, with an insulating sponge to maintain a low noise level.

VIDEO

Catalogs

No catalogs are available for this product.

See all of DEPURECO INDUSTRIAL VACUUMS‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.