Cup anemometer WIND-E725

digitalcompactwith alarm

WIND-800 anemometer for working with winds up to 120 km / h. It has 3 potential-free relays configurable by the customer. It has 3 programming buttons. The vane has dimensions of 150mm in height and a turning diameter in the cups of approximately 130mm. Inside it has a toothed wheel for use with an electronic photo-switch and in this way to achieve trains of pulses, which after processing will indicate the wind speed. The electronic control card must be powered by a 12Vdc source and the data is sent by possible means of communication: CANBus (standard mounting) or RS-485. In addition, it has a heating resistance, to increase the temperature inside, in the event that the ambient temperature is below 0º. This resistance reacts and acts. Supply voltage: 100-240Vac / 50Hz-60Hz (Optional 48Vac and 24 Vac / Vdc) Output to Speed ​​Relay 1 and Speed ​​2 (programmable): Maximum effective voltage: 250Vef Maximum effective current: 6A. Note: These outputs must attack a resistive type load, or loads with little capacitive or inductive effect. Maximum wind speed: 200km / h Resolution: 0.1km / h Interface: 8 Digits Alphanumeric LCD Display, 4 LED's status indicators and 4 push buttons for programming. "WIND-800" box dimensions: Length 90mm x 72mm