Signal amplifier PI2MEQX2503

switchingfor signal generators

The PI2MEQX2503 provides two lanes and clock MIPI D-PHY ReDriver™ with regenerates the D-PHY signaling. The device complies with MIPI D-PHY1.2 standard and can be used in either a MIPI CSI-2 or MIPI DSI application at datarates of up to 2.5Gbps in D-PHY. The device compensates for PCB, connector, and cable related loss and switching related loss to provide the optimum electrical performance from a CSI2/DSI source to sink. The inputs of PI2MEQX2503’s feature configurable equalizers. The PI2MEQX2503 output voltage swing and edge rate can be adjusted by changing the pin state. It is optimized for mobile applications, and contains activity detection circuitry on the D-PHY Link interface that can transit into a lower power mode when in ULPS and LP states. The PI2MEQX2503 supports industrial temperature range from -40ºC to 85ºC. Feature(s) MIPI D-PHY1.2 Specification Compliant Enables low-cost Cable Solutions Supports 2 lanes at 2.5 Gbps in D-PHY Sub mW Power in shutdown state Supports MIPI DSI Bi-directional LP Mode Supports ULPS and LP Power States Adjustable Output Voltage Swing Selectable TX Pre-emphasis Levels Adjustable Rx EQ to Compensate Insertion Loss Configurable Edge Rate Control Dynamic Data Compensation 2kV ESD HBM Protection Industrial Temperature Range: –40°C to 85°C Available in single 1.8V - supply Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) For automotive applications requiring specific change control