CNC press

hydraulicfor molding4-column

From 1 ton to 100 tons, the automatic mold adjustment technology can be selected, and the two-way convection valve is used for adjustment. The intermediate control program is used to adjust the required height of the cylinder, which is not easy to damage the mold. It adopts a four-column structure, and the movable plate is parallel to the working surface. A guide sleeve makes the vertical precision of the lower pressure high, the oil cylinder adopts an adjustable type, and the moving mechanism of the upper platen is composed of an oil cylinder, a linear bearing, a 4-column guide rod, a mold, a mold pneumatic clamping device, a vacuum suction cup and other components. 2. This series of equipment uses liquid as a medium to transfer energy, and the pressure holding time can be freely adjusted within 0-24 hours; 3. The noise of the equipment is much smaller than that of similar products when it is in standby; 4. The upper and lower working surfaces are equipped with heat-treated heating plates, and there are universal T-slot fixed molds, which are controlled by intelligent thermostat PID. The precision is high, and the temperature error is within ±1°C; 5. The four-column three-plate structure is adopted, the vertical accuracy of the movable plate is controlled by four guide sleeves, and the parallel accuracy of any point between the lower working surface and the upper working surface is below 0.08MM; 6. Adjustable positioning oil cylinder is adopted, the positioning accuracy of the bottom dead center is high, and the repetition accuracy is below 0.01mm to ensure the imprinting depth;