Qualification tester CR Phantom

Easily qualify Computed Radiography systems in accordance with the latest standards (EN 14784-1, ASTM E 2445). Ultra-compact With only 20 cm height and 27.5 cm width the smallest CR Phantom on the market Ready to use Including report template and test procedure Well protected A lined wooden case protects the CR Phantom during storage and transport CR Phantom can test all relevant parameters of CR Scanner systems including basic spatial resolution, unsharpness, contrast, MTF, laser beam jitter, scanner slipping and shading. These tests demanded and described in detail in standards ASTM E 2445 and EN 14784-1 have to be performed periodically. The DÜRR NDT CR Phantom exceeds these standards by including two Duplex wire type IQIs. Measuring points for shading correction are arranged in both axis directions - panorama and landscape. All required information is mapped on the imaging plate with a single X-ray exposure - the CR Phantom need not be rotated to generate the information of the second axis. This results in more accurate test scores and significant time savings. • T-target - Brass Laser Beam Jitter, MTF Check, Blooming (Flare) • Duplex Wire Type IQI 15D - HiRes Basic Spatial Resolution, Unsharpness • BAM snail Central Beam Alignment • Line Pair IQI Line Pair Resolution • Measuring Points Shading Correction • Cassette Positioning Locator Positioning of Cassette • Homogeneous AL Strip Scanner Slippage, Shading • Lucite Plate Carrier Plate • cm/inch Ruler Linearity Check • Contrast Sensitivity Gauge Contrast Sensitivity