Rotating shaft seal MSB
lippedVhousing

rotating shaft seal
rotating shaft seal
Add to favorites
Compare this product
 

Characteristics

Type
lipped
Configuration
V
Application
housing, for pump, stud, for hydraulic applications, for hydraulic fluids, industrial, for rotating shafts, motor, fitting, for chemical applications, gearbox, shaft, for screw compressors, axis
Fluid
water, air
Other characteristics
hydraulic, dynamic, pneumatic, single-acting, radial
Temperature limit

Max.: 300 °C
(572 °F)

Min.: -50 °C
(-58 °F)

Pressure limit

Max.: 15 bar
(217.6 psi)

Min.: 0 bar
(0 psi)

Diameter

Max.: 340 mm
(13.386 in)

Min.: 5 mm
(0.197 in)

Outer diameter

Max.: 380 mm
(14.961 in)

Min.: 16 mm
(0.63 in)

Speed

Max.: 40 m/s
(131.2 ft/s)

Min.: 0 m/s
(0 ft/s)

Description

VR radial sealing rings seal rotating shafts, spindles, journals and all rotating axes. The main advantage of the VR radial shaft sealing ring is the low torque on the rotating element to be sealed. The torque is reduced by 50% to 60% compared to conventional lip seals. This benefit allows: The use of standard or stainless steel shafts Removal of surface treatments: carburizing, hard chrome plating, etc… The direction of rotation is irrelevant High non concentricity (up to 0.4mm) Roughness Ra 0,4 ED This allows: A very low friction on the shaft Very low heat build-up Use with many fluids (8 different standard elastomers) Reduced space requirement How it works: The operation of the VR joints is based on 2 fundamental characteristics: A radial force between the seal lip and the shaft Additional pre-tension of the lips on the axis

Catalogs

No catalogs are available for this product.

See all of Duff-Norton Europe‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.