IP54 fan A3G500-BA74-N1

axialventilationDC

• Weight : 7.4 kg • Motor size : 112 • Size : 500 mm • Rotor surface : Painted black • Electronics housing material : Die-cast aluminum, painted black • Impeller material : PA plastic, sheet-metal plate painted black • Number of blades : 5 • Airflow direction : A • Direction of rotation : Clockwise, viewed toward rotor • Degree of protection : IP55 • Insulation class : "F" • Moisture (F) / Environmental (H) protection class : H3 • Max. permitted ambient temp. for motor (transport/storage) : +80 °C • Min. permitted ambient temp. for motor (transport/storage) : -40 °C • Installation position : Shaft horizontal or rotor on top; rotor on bottom on request • Condensation drainage holes : None • Mode : S1 • Motor bearing : Ball bearing / (sealed) • Technical features : - Output 10 VDC, max. 10 mA - Alarm relay - Integrated PID controller - Run monitoring - Power limiter - Motor current limitation - Emergency operation - PFC, passive - RS-485 MODBUS-RTU - Soft start - EEPROM write cycles: 100,000 maximum - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Overvoltage detection - Thermal overload protection for electronics/motor - Line undervoltage / phase failure detection • EMC regulations : according to EN 50121-3-2 • Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) : <= 3,5 mA • Motor protection : Thermal overload protector (TOP) internally connected • with cable : Lateral • Protection class : I (with customer connection of protective earth) • Conformity with standards : EN 15085-1, CPC3; EN 45545-2, HL3; EN 50155; EN 61373, Cat. 1B / CE • Approval : EAC