Valve terminal Pneumapole-l-12-fach-size-10-multi-pin

Pneumapole IP66 and IPx9 connector plate VTUG Ebora Process Automation has made a development in collaboration with Festo for a pneumatic multipole connector plate for control cabinet assembly. It has been specifically developed for the Festo VTUG valve terminal. This addition to the VTUG valve terminal made it into a worthy successor for the CPV valve islands with Pneumapole multipole connector plate for control cabinet assembly and even more functionality and improvements. Festo VTUG with Pneumapole: The biggest advantage related to the currently existing Pneumapole connector plate for control cabinet assembly is that it covers the cut-out in the cabinet. Consequently you are able to cut a hole for the valve terminal by hand. Normally the edges will corrode in the long term, even if you make the cut-out with a laser cutter. The second advantage is that you install the valve island by sliding it in from the outside. So you do not need extra space in the cabinet to mount it. The third advantage is that the panel builder does not need to know a lot of pneumatic systems because he only needs to connect the electrical parts. With this valve terminal you are able to exchange the valves very easily by means of the two screws on the valve. The multipole connector plate is made of stainless steel 304 with a roughness of <0.8um and has a to the cabinet in a way that it is as hygienic as possible. The Pneumapole is not a separate part, but is permanently mounted by Ebora on the valve terminal.