Clinching hand tool MCD 30/5 PH

clinching hand tool
clinching hand tool
clinching hand tool
clinching hand tool
clinching hand tool
clinching hand tool
clinching hand tool
clinching hand tool
clinching hand tool
clinching hand tool
Add to favorites
Compare this product
 

Description

The MCD 30/5 PH portable clinching frame is a sturdy, light-weight machine with one-hand control. This clinching frame has been specially designed for mobile use. The frame is connected to the hydraulic unit with a 6 m hydraulic hose. Clinching tools (punch and die) are not included in the scope of delivery. They must be chosen separately, based on the actual joining task. The portable clinching frame comes with a continuously adjustable stroke limitation for reproducible clinching result. Its frame head can be rotated by 360° for easy positioning on workpieces. The clinching frame is driven by our pneumohydraulic pressure booster PHD-001. Technical data Drive - Hydraulic Stroke frequency - Single stroke Press force - 50 kN at 500 bar For clinching options - S-DF, R-DF 6 and R-DF 8, G-DF 6 and G-DF 8 Throat, horizontal - 30 mm Throat, vertical - 34 (12.5 / 21.5) mm Stroke - 6 mm Max. total thickness - 3.0 mm steel and Aluminium* Weight 4.0 kg (without hose) Hose length - 6 m *The max. total thickness refers to steel and aluminium alloys with good forming properties, an elongation at break A80 ≥ 12 % and a yield-to-tensile ratio Rp0.2 / Rm ≤ 0.7. Examples: steel: DC04 • DX56 • CR180BH; aluminium: AlMg3 • AlMg4.5Mn0.4 • AlMg0.4Si1.2(T4). Deviations from these workpiece thickness combinations might be possible. For details, contact ECKOLD. Pressure booster Inlet pressure - 5 - 16 bar Length / Width / Heigth - 330 / 197 / 477 mm Weight - 18 kg Compressed air - max. 6 bar
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.