Half-mask respirator Polimask DUPLO Combi A1-P1R D

double-filterparticulatelightweight

Product information • low-maintenance double filter half mask made of non-irritating EPDM • very light, comfortable and economical through replaceable filters • owing to the special design the mask is suitable for spectacle wearers • completely ready for use with filters • protection against solvents, organic gases and vapors with a boiling point >65°C as well as particles (P1) Product designation: Half Mask Polimask DUPLO Combi A1-P1R D Applied standard: DIN EN 140 and DIN EN 14387 (DIN = German Institute for Standardization) Utilization: As filtering device, in connection with two Combined Filter 200 A1-P1R D (DIN EN 14387). The scope of protection is determines by the product information, technical standards and valid application rules. Description: Faceblank enclose the nose, mouth and chin. Materials: Faceblank EPDM (Ethylene-Propylene-Diene-Mixture) Fastener for head harness Polyamide Head harness Rubber Inhalation- and Exhalation valve Rubber Exhalation valve fit Plastic (ABS) Exhalation valve cap Polyethylene Filter connector Polypropylene Filter case: Polystyrene Sorbents: Impregnated active charcoal Particle filter: Microfiberglass, Cellulose fibers Weight: approx. 145 g (not included combined filter 200 A1-P1R D) approx. 283 g (included combined filter 200 A1-P1R D) Inhalation resistance: at 30 l/min, constant flow max. 0.5 mbar (EN 140) at 95 l/min, constant flow max. 1.3 mbar (EN 140) at 160 l/min, constant flow max. 2.0 mbar (EN 140) Exhalation resistance: at 160 l/min, constant flow max. 3.0 mbar (EN 140)