Gas filter DIRIN 230 K2

safetythread connection

Product information • protection against ammonia Product designation: Gas Filter DIRIN 230 K2 Applied standard: DIN EN 14387 (DIN = German Institute for Standardization) Utilization: In connection with full masks (DIN EN 136) and half masks (DINEN 140) with round thread connection (DIN EN 148-1). Protection against ammonia. Description: The filter case is round and consists of filter pot and filter lid. The filter pot contains the round thread connection according to DIN EN 148-1; the filter lid is open to the inhalation side. There is a filter bed with activated charcoal. This is firmly fixed by the filter case and internal screens. Both filter openings are locked by water-vapour-proof cover caps. Materials: All used materials are incinerated. Filter case: Plastic (ABS) Sorbents: impregnated active charcoal Cover cap: Plastic Banderole: Paper Operating principle: By addition to sorbent (Impregnated active charcoal), the gases and vapours will be removed from the ambient air. Weight: approx. 226 g Inhalation resistance: at 30 l/min, constant flow max. 1.4 mbar (according to 14387) at 95 l/min, constant flow max. 5.6 mbar (according to 14387) Marking: Trade mark of manufacturer (LOGO) Product designation Applied standard Consider the information brochure Expiry of shelf-life (MM/YYYY) Lot-No. (PARTITA) CE-Identification Notified body Identification color: green Handling: Open the Filter (Remove the cover caps) and screw the Filter firmly into the facepiece connector directly before use.