Industrial chimney

SINGLE WALL STAINLESS STEEL CHIMNEY SYSTEMS They are stainless steel chimney systems used in the building shaft for solid, liquid and gaseous fuels. If there is an application for the shaft, there is no need to apply insulation to the flue remaining in the shaft. The vertical load is carried on the wall stand or the main carrier stand and the modules are connected with flue clamps. Our chimneys are produced in high quality with continuous TIG/WIG welding. It provides easy and reliable mounting with bell plug and flue clamp in negative pressure conditional systems. In positive pressure systems, sealing is ensured with a specially produced gasket inside the muff.” 90° ELBOW The friction in the chimneys is important. manufactures two different types of elbows, fixed knuckle and movable knuckle. Movable knuckle elbow modules, one of the most important products produced, are assembled using a universal system and a special flange clamp system. Each node of the elbows, for which special calculation methods are used, can be narrowed or expanded by turning them during assembly, if desired. In this way, since the gases coming out of the chimney do not collide with the flange system outward after installation, the waste gas reaches the atmosphere with minimum friction – maximum speed. After the clamps are tightened, the module becomes stronger than the welded modules and gains strength.” “Technical Specifications Material Used Angle: 1.4301-1.4401 Stainless Steel (316 L)- 15°-30°-45°-60°-75°-87°-90° Dimensions: Ø 100~1200mm h: 500 ~600 mm