Chemical dispensing nozzle ZVA-RG, ZVA-GBZ, ZVA Slimline TD

ELAFLEX HIBY offers corrosion resistant automatic nozzles and non-automatic nozzles. The nozzles for chemicals and solvents are supplied with fixed hose inlet (swivels) as standard. To safely avoid hose torsion and to improve nozzle handling. Type ZVA Slimline / ZVA 25 (solvent version) Nozzle manualy operated for solvents and chemicals. Body aluminium, inner parts of stainless steel, available seal sets: TD / VD / Vi / EP Type ZVA 25 GR Automatic nozzle for active vapour recovery, flow rate up to 140 l/min. Environmental regulations increasingly require improved emission protection. Therefore the ZVA 25 GR can be used when filling solvents into cans, drums and containers. Type ZVA - RG Automatic nozzle ZVA DN 19, of red bronze, for solvents and corrosive media. Flow rate up to 60 l/min. Working pressure 0,5 to 4 bar. Type ZVA - GBZ Automatic nozzle ZVA DN 19, of red bronze (GBZ), for drinking alcohol, brandy etc. Flow rate up to 60 l/min. Working pressure 0,5 to 4 bar. Type ZVA - VA Automatic nozzle ZVA DN 19, stainless steel, for chemicals, acids, alkalis and solvents. Flow rate up to 60 l/min. Working pressure 0,5 to 3 bar. Non-automatic Nozzles Type ZV 19 Manually operated nozzle, DN 19 (3/4"), for solvents. Steel parts replaced by stainless steel. Lever rilsan coated. Type ZV 400 (ZV 500) Manually operated nozzles for solvents and chemicals. inner parts of stainless steel.Flowrate up to 400 l (650 l). Seals: VD / VI / EP.