Sound warning device GX-B1pro

The socket gas warning device with internal sensor for town gas and natural gas is plugged into an upper (natural gas / methane) or lower (liquid gas / butane, propane) socket depending on the gas, is ready for operation after 3 minutes preheating time and warns already far below dangerous gas concentrations with a loud alarm tone and red flashing LED. POSSIBLE APPLICATIONS Monitoring of gas heating or gas cooker / detection of town, natural and liquid gases Monitoring of the heating and utility rooms Storage of liquid gas cylinders or camping gas Air conditioners / coolants DESCRIPTION This cylinder and natural gas detector with internal sensor ensures optimum detection of the corresponding gases and is an indispensable safety device in almost every household with a gas connection! Simply plug the GX-B1pro gas detector with internal sensor into a socket at a suitable height, without any installation work. Gas detector GX-B2pro with external sensor simply plug into a socket and position the external sensor at the appropriate height. The suitable height depends on the gas to be detected. For methane and thus natural gas, the sensor is mounted upwards, approx. 30cm below the ceiling. For butane and propane, i.e. gas from bottles, the sensor is mounted about 30 cm above the floor. The systems are already activated at gas concentrations that are far below dangerous levels for you. You are warned twice, with a visual and a loud acoustic signal. These gas detectors are easy to test with the pressure and volume-reduced gas from a lighter. Notice: Depending on the type of gas, observe the correct position height and simply plug the gas detector into the socket.