Gas detector GX-HS

piezomonitoringwith alarm

Gas Alarm GX-HS is a gas detector for various gases, with a suitable sensor in each case. Alarm signal on the device optically and acoustically, additionally with potential-free relay (e.g. for solenoid shut-off valve). DESCRIPTION The Gas Alarm GX-HS is a gas detector for various gases and already warns at a gas concentration that is far below the life-threatening value. This monitoring system is therefore set very sensitive according to its purpose. A suitable sensor must be used for each gas type. (Information on triggering and minimum concentration can be found in the operating instructions for the sensor in each case). The alarm signal is given visually and acoustically on the device (optionally, an external buzzer/piezo alarm transmitter can be connected to the device). In addition, a potential-free relay is switched, e.g. to switch a solenoid shut-off valve (lock gas supply line) with the relay, so that no further gas can escape at a possible leak in the gas line or in the gas boiler and to operate a switching input in the building control system with a second relay / fault relay. Mounting instructions The warning device and the sensor may only be installed in dry indoor areas and must be placed correctly, depending on the type of gas, to ensure proper functioning of the warning device. The assembly must be carried out by a qualified specialist. Please observe the five safety rules! Top-hat rail mounting The Gas Alarm GX-HS is installed in distribution boards and control cabinets on a standard 35 mm DIN rail (top-hat rail).