Sound warning device GX-C300P

Professional carbon monoxide warning device for permanent installation with warning levels and alarm delay times as specified in the DIN EN 50291 standard and suction device by means of a silicone hose to monitor thermally demanding rooms (e.g. gas-operated sauna). Display of the exact measured CO concentrations in ppm on an illuminated plain text display. In the event of an alarm and technical faults detected by the unit itself, a potential-free changeover relay switches in each case, e.g. to activate forced ventilation or to inform the BMS. The internal electrochemical sensor has a service life of 6 to 10 years, depending on the ambient conditions, and can easily be replaced by Elektrotechnik Schabus at the factory. DESCRIPTION The professional CO warning and measuring device GX-C300P with internal electrochemical sensor is equipped with a negative pressure system that allows a hose to be placed in the room to be monitored. Either the room is very dusty (pellet and wood chip bunkers) or thermally demanding (gas-fired saunas and cold stores) or no electrical wiring is allowed, in which case extracting the air is the only way to measure the CO concentration. No large quantities of air are needed; a low negative pressure in the warning device is sufficient to obtain correct measurement results after 30 seconds at the latest. For rooms with a high dust load, a filter is supplied, which should be replaced if necessary, at the latest annually. By default, the unit operates strictly according to the EN 50291 standard, but can be programmed to your requirements at the factory before production.