Condensation detector SHT 217

opticalacousticliquid

The SHT 217 socket water detector functions as a pump control. If the sensor detects soil moisture, the socket switches on the connected pump and an alarm sounds. After the sensor has dried, the pump continues to run for an adjustable follow-up time of 0 to 100 seconds, is then switched off and the alarm stops again. POSSIBLE APPLICATIONS Water ingress Pump control Cistern monitoring Pump sump (dry) Delivery time: 2-3 workda DESCRIPTION Functional Description: The SHT 217 water detector is a plug-in pump controller that switches on a connected water pump when a certain water level is reached and also switches it off again after an adjustable follow-up time of 0 to 100 seconds after the sensor has dried. An acoustic and optical warning signals the presence of water. A safe and defined switch-off behavior can only be achieved with mini float switches(SHT 227). Extension sensor cable: If required, you can extend the sensor cable up to 50 m with a cable (2 x 0.14 mm²). In doing so, you must cut the existing sensor cable and reconnect it with clamps. Without acoustic alarm: The same device is available as a water detector SHT 218 (Art. No. 300218) without acoustic alarm. Use with non-conductive liquids: For other liquids such as heating oil, diesel, vegetable oil, lubricating oils, etc. you need the SHT 227 device (part no. 300227) with float switch. Use water sensor in pump sump (condensation water): Use the SHT 227 device (part no. 300227) with mini float switch if the water sensor is used for cyclic operation. Performance features Simple installation (230 V socket unit) Audible and visual warning Connected unit is activated when water is detected