Assembly instruction
The surface to be coated must be free of grease and dust.
Remove the cover from the contact strip and stick the conductive tape onto the contact surfaces on the door and frame with some pressure. For better adhesion the conductive tape is wider than the mask.
Powder-coating can then be applied, whereby the mask prevents the coating adhering to the conductive tape. The baking temperature for powder-coating should be as low as possible.
After powder-coating, the mask can be easily removed (preferably while still warm) while the conductive contact tape remains securely in place.
The continuous operating temperature should not exceed 90° C.
Note
A = Cover
B = Conductive tape, self-adhesive
C = Mask