Air cooler SILENT EVO 3 Series

oilcompact

Most hydraulic systems are less than 100% ecient. Any lost energy is converted to heat which is radiated to the hydraulic uid. This increases the uid temperature, which if not controlled will continue to rise and lead to premature failure of the hydraulic system. In order to dissipate this heat and maintain the system in good condition a heat exchanger must be installed in the system. The heat exchanger should be selected with enough capacity to maintain the uid at a constant temperature at the highest expected ambient temperature. See g 07, Page 8, performance curve... In many cases, high oil ow rate, high working pressure, or substantial pulsations in the system, may prevent the use of a conventional inline (return line ow) heat exchanger. In these cases an oine cooling solution is preferable. EMMEGI has developed an o-line air/oil cooling series, the SILENT EVO 3, which uses a “recycling principle”, taking the oil from the tank, cooling it and ltering it (Filter optional) before returning it to the tank. The oine EMMEGI cooling system incorporates a volumetric screw pump driven by an electric motor, feeding the heat exchanger with a xed uid ow. The electric motor also drives an axial fan which blows ambient air over the heat exchanger. This combination provides a highly ecient, cost eective and compact oine cooling solution. The cooler can be ordered with a fully protective steel cover allowing for it to be installed outside. An optional electrical box is also available containing the necessary motor starting contactor and fuses. This box is prewired to a 3M y lead and 5 pin 16A 3 phase plug (standard version).