Scroll vacuum pump EVSL series
oil-freesingle-stagesuction

scroll vacuum pump
scroll vacuum pump
Add to favorites
Compare this product
 

Characteristics

Technology
scroll
Lubrication
oil-free
Number of stages
single-stage
Applications
suction
Other characteristics
direct-drive
Ultimate vacuum

0.01 mbar, 0.02 mbar, 0.04 mbar
(0 psi, 0 psi, 0 psi)

Flow rate

Max.: 65 m³/h
(2,295.45 ft³/h)

Min.: 7.2 m³/h
(254.27 ft³/h)

Description

EVSL series The EVSL-series is the Oil Free solution for medium vacuum applications. Eurovacuum EVSL-series pumps are oil free scroll vacuum pumps and compressors. They provide a clean vacuum without oil contamination. Pumping from atmosphere to ultimate vacuum in seconds and suitable for repeated switch on/off operation. Suction, compression and discharge are processed continuously, resulting in minimum pressure pulsation, less vvbration and low noise. Any gas pockets are efficiently sealed ensuring minimum gas leak and back streaming. No oil or water is needed and there is no need for daily maintenance on the pumps. Operating principle The EVSL-series scroll pumps are constructed with: fixed scroll, orbiting scroll, main shaft, cooling fans, crank shaft kits and bracket. Their operating principle is based on two spiral cylinders, one offset and orbiting against the other with an offset of 180°. Thus several crescent-shaped pockets of differing sizes are created. By means of an eccentric drive, the orbiting scroll is made to orbit about the fixed scroll, reducing the volume of the pockets and compressing gases from the outside towards the inside thereby pumping the gases from vacuum chamber.

Catalogs

No catalogs are available for this product.

See all of Eurovacuum B.V.‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.