Plastic card printer thermal transfer ribbon 1/2 YMCKO-KO series

The Evolis High Trust® ½ YMCKOKO ribbon is the ideal solution when you personalize just one part of your card in color (cards featuring a color ID photograph) and some black resin printing (for text, logo and barcode) on both sides of the card. In many cases, this ribbon is used on blank plastic cards, but also on pre-printed cards that require printing durability on both sides at a low cost. An advantageous cost per card regarding to the YMCKO (50% less) and the 1/2YMCKO (19% less) color ribbons when you personalize in color just a part of a card and require overlay on both sides for a higher lifespan. All ribbons are formulated to produce sharp, bright images and clear text. The protective varnish allows a better lifespan of your prints. Tested and validated by Evolis R&D and Quality departments, these consumables bring you printing quality and reliability • For dye-sublimation and thermal transfer technologies • For dual-sided cards: color printing on the front, black printing on the back • Ribbon in PET with thin layer of specialized coatings. Very low concentration of colorant insoluble in water • 7 panels - Y, M, C - Yellow, Magenta, Cyan : 49 mm (1.93’’) length - K, O, K, O - Black, Overlay, Black, Overlay : 98 mm (3.86’’) length • The color-printed area length must not exceed 35 mm (1.37’’) and 54 mm (2.12’’) for the height, but can be placed anywhere on the card • Overlay thickness: 1.1 microns • Printing lifespan: up to 3 years • Compatible with PVC or composite cards • Printing process: diffusion temperature above 50°C / 122°F.