Microplasma welding machine with standard gas metering unit
Cooling unit with centrifugal pump,
Plasma manual welding torch without setting gauge,
Trolley (4 rollers) for transporting a power source, a cooling unit and one or two shielding gas cylinders, Two shielding gas cylinders
Workpiece lead with clamp, 170 A / 60 %, 16 mm²
Cylinder pressure regulator, :
Pressure regulator "Maxex", :
Gas hose,
Gas hose, 2 m
Coolant up to -10 °C (14 °F), 5 l,
Threaded adapter for connecting 1/4" left-hand thread gas hoses to welding machines with 1/4" right-hand connecting nipples,
Electrode setting gauge, suitable for PHW 100/150 and PWM 100/150
Standard gas metering unit for plasma gas and shielding gas:
Plasma gas setting range 0.1 l/min to 0.9 l/min
Shielding gas setting range 1.0 l/min to 17 l/min
Microplasma welding machine with standard gas metering unit
Welding procedures and functions
Plasma and TIG welding
Plasma and pulsed TIG welding
Plasma and pulsed TIG welding up to the kHz range allow a high welding speed with minimal heat input using a constricted arc
Plasma and TIG welding current adjustable in 0.1 A increments
Pilot arc current separately adjustable for start phase, welding phase, end-crater and welding break
Temperature, flow and pressure monitoring for the coolant circuit
Non-latched/latched operation
Spot welding/tack function (spotArc/spotmatic)
Adjustable up-slope and down-slope time
Spotmatic – reduce the time required for tacking by up to 50% (TIG only)
Adjustable gas pre- and post-flow time