Digital speed regulator FE230/T

single-phasefor induction motorsmicroprocessor

Digital speed regulator for single-phase induction motors with temperature probe The FE230/T module is an advanced electronic control system with microprocessor dedicated to the manual or automatic speed regulation of a single phase induction motor (typically intended for applications of air suction), to the management of the lighting system and a solenoid for the gas supply (or other type of load such as, for example, an external solenoid for the chimney's opening). The accuracy and the practicality of use are guaranteed by the use of a last generation microprocessor and by digital commands on the front panel. This model can work both in manual or automatic mode. The instructions below explain its functioning. Technical features • Single-phase power supply: 85-265 Vac 50Hz. • Fuse: IOAT. • Stand-by power consumption (loads off): 0.35 W. • Phase control with triac: speed rmtor setting and switch with relay. • Type of motor: single-phase induction. • Maximum load MOTOR: 4,5A. • Maximum load LIGHTS: 2A. • Features for gas solenoid valve: 230 Vac 50Hz MAX. IA. • Automatic mode management via NTC temperature probe. • Digital input, as an alternative to the NTC temperature probe, to control a thermal contact (normally closed) for the protection of the motor windings. • Digital control settings with 5-key keypad, I LED and 1 7-segment LED digit display. • IP protection: IP56. • Dimensions: 158x118x77 mm. • Weight: 0.37 kg.