Shock test equipment

automaticflameindustrial

FESTEC’s IEC 60331-12 tester is used in test conditions where the basic flame temperature is at least 830℃ and tests the cable exposed to flame and mechanical shock that needs to maintain the circuit integrity. • IEC 60331 - Test for electric cables under fir conditions – Circuit integrity • IEC 60331 Part 12 - Apparatus – Fire with shock at a flame temperature of at least 830˚C • IEC 60331 Part 31 - Procedures and requirements for fire with shock – Cables of rated voltage up to and including 0.6/1kV • IEC 60331-1 - Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm • IEC 60331-2 - Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm • IEC 60331-3 Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including - 0,6/1,0 kV tested in a metal enclosure - Test Chamber Size : (W) 2,500 x (D) 1,800 x (H) 1,600 mm - Test Apparatus(Test Ladder) Size : (L) 1,200 x (H) 600 mm - AC Motor : 4 pole / 3 P / 220VAC / 60 Hz / 1,550 RPM / 9.40 kg-cm - Heat Source : Ribbon type Propane Gas Burner - Burner Dimension : (L) 500 x (W) 10 mm / Space of hole : 3.2mm - Auto Ignition system - Mass Flow Controller ; Gas : 15 SLPM / Signal Output : 0 ~ 5V / Accuracy : ±1 % fo F.S ; Air : 180 SLPM / Signal Output : 0 ~ 5V / Accuracy : ±1 % fo F.S - Electric Control : Transformer & Slidacs : 3 Phase 3 wire, 100~1,000V