Protocol converter T210

communicationsHARTRS-232

T210 is an OEM built-in module for converting Modbus RTU based instruments to HART General description: HART slave OEM module for built-in application Provides HARTability to Modbus transmitters Modbus connection options are RS485, RS232 or CMOS. Connects to the 4-20 mA line in the same manner as a handheld communicator T210 supports HART 5 Universal commands and selected Common Practice commands. T210 supports Device Specific commands on request. T210 is compliant with the HART 5.8 standard. T210 supports HART burst mode and multidrop communication Small dimensions, 50 mm by 50 mm Flash programmable T210 is an OEM board designed for integration in 4-20 mA instruments with a Modbus RTU output. It allows upgrade of 4-20mA instruments to HART. It supports RS 232, RS 485 or a CMOS UART on the instrument interface. T210 communicates on a serial line supporting the Modbus protocol. It reads four variables from the instrument. Calibration and parameter set-up capabilities may require additional programming. The T210 module can be adapted and customized to meet user specific requirements. T210 does not control the loop-current. The main instrument is supposed to do that. T210 connects capacitively to the loop. If the loop-current must be controlled in order to do loop testing or 4-20 mA trimming through a HART command, this can be achieved by adding the required support on the internal communication line between the T210 and the instrument. T210 supports HART Universal Commands. If required, it may support additional Common Practice and Device Specific Commands. T210 application possibilities: Gas detectors Analysers