The filter has two zinc coated steel end caps on both sides, the upper one with a glued plastic ring to hold the following filter in position and the lower one with a glued cylindrical gasket for tide connection to housing. The reinforced pleated filter media (FA8267) is potted together with the expanded zinc coated steel screens into the caps with polyurethane. The embossed pleating spacers on the top of each pleat and the hot melt fixation on the inside ensures the uniform shape of the filter media through the filter lifetime. This construction gives a highly active filter surface with a high dust holding capacity and a low pressure drop.
Testing
Each filter is tested on size and also visually tested for tightness and complementation. In our laboratory, we check the tensile strength of un-pleated and pleated media using the dumb-bell shape of each roll.
Furthermore, the design of those cartridges is approved through many kinds of examinations, such as the dust holding / pressure drop test and also the rust and extreme condition tests.
Features
For use with GRV as filter pair
High quality paper made of cellulose & synthetic components
Filter is pulse cleanable
Long lifetime through media with high tensile strength
Lowest initial pressure drop
Zinc coated end caps with glued sealing
Expanded zinc coated screen with high open surface
High quality standard due to Quality Assurance System according to Iso 9001:2000
Highly economical through high final pressure drop
For use in gas turbine air filtration with back pulse
Standards
High quality standard due Quality Assurance System
ISO 9001:200