Permanent magnetic sheet separator 3005 series

Plate-spreading-magnets are used for separating of stacked iron and steel sheets. The sheet separators are laterally grown from the sheet stack, they magnetize the sheets with the same poles, which repel them from each other. Plate-spreading-magnets apply both in automated systems where plates with vacuum or transshipped are magnetic, and the manual work, where the gripping sheet is greatly facilitated by their help. Our Plate-spreading-magnets consist of a reinforced magnet system, which is installed in a stable sheet steel housing. The front panel is made ​​of stainless steel. On the rear side, mounting holes are introduced. Switchable Spreading Especially in automated applications requiring, that spreading magnets must be switchable to the Standard magnets are built in stainless steel housings and tilted inside the housing with pneumatic or hydraulic drive elements. Selection Criteria - Plate thickness / magnetic dimensions according to Table - The sheet separators should have about 3 times the length of the sheet stack height Every spreader can spread approx 30dm2 plate surface, in highly oily sheets just 15dm2, then a plurality of magnets are needed. Plate-spreading-magnets are used for separating of stacked iron and steel sheets. The sheet separators are laterally grown from the sheet stack, they magnetize the sheets with the same poles, which repel them from each other. Plate-spreading-magnets apply both in automated systems where plates with vacuum or transshipped are magnetic, and the manual work, where the gripping sheet is greatly facilitated by their help.