Electronic pressure switch KL5 series

IP65adjustable

Switching frequency: 200 cycles/min Setting point: The maximum operating point is found acting on the right button “+MAX”; to decrease the value acting on the button “-MAX”. The minimum pressure operating point (hysteresis) is found by acting on the both keys (MIN). The red led, will light up once that the key is correctly pushed. Switching accuracy: ± 1% of end of scale at 20°C Hysteresis value: adjustable between 2% and 90% of the set value (minimum hysteresis 2 bar). By lowering the maximum pressure if the minimum pressure is reach, the latter is automatically lowered while keeping the minimum hysteresis. Weight: 0,3 Kg Mechanical life: 10x106 cycles at 20°C Body: 30x30mm square in anodized aluminium Wetted parts: in stainless steel AISI 316 L with ceramic sensor and integral seal in NBR Installation: in every position with ¼” BSP-F threaded port or Cetop flange without necessity of adaptors Electric Features: - Maximum contact load: 0,5 A - Exchange contacts (Common, NO and NC) – SPDT - Electric connection according to DIN43650, M4 - Electric connection according to IEC60947-5-2, M12 - Electric protection according to DIN40050, IP65 - Medium consumption: 20 mA - Power supply: from 12 to 24 Volt - Non-volatile memory: EEPROM Warranty: see dedicated page Spare parts: see dedicated page Also available: - execution with regulation range -1>0 bar - Special max pressure - Special electrical connection - Special value of hysteresis - CU-TR for Russian market