Vibrating screener KTS-VS series

tumblerparticlestainless steel

The machine is driven by a vibration motor attached directly to the centre below the screen body. The screen body can vibrate freely and three dimensionally by means of dislocation via precisely adjusted springs. The difference between this model and the KTS tumbler screening machines is the acceleration, which is 3-4 times higher at a comparatively low amplitude. Because the amplitude gets smaller towards the top with each additional screen deck, only 3 decks can be installed per machine. The centrifugal force of the motor can be altered, as can the offset angle between the upper and lower flyweight in order to adjust the retention time of the product on the screens. The machine The machine is driven by a vibration motor attached directly to the centre below the screen body. The screen body can vibrate freely and three dimensionally by means of dislocation via precisely adjusted springs. The difference between this model and the KTS tumbler screening machines is the acceleration, which is 3-4 times higher at a comparatively low amplitude. Because the amplitude gets smaller towards the top with each additional screen deck, only 3 decks can be installed per machine. This machine has the same top section like the tumbler Screening machine particularly suitable for Screening of high value products in the food and pharmacetical sector. • High screening efficiency, fast fine particle discharge, adjustable retention time • Developed for control- seperation- and dust removal of high-value products • Delivered operationally ready and adjusted to each product • Up to 4 fractions simultaneously on each machine