Manual stripping machine D2 S

cableelectricpneumatic

The MANUAL STRIPPING MACHINE D2 S is a manual bench machine used to UNIPOLAR AND MULTIPOLAR CABLES EXTERNAL SHEATHING and to STRIP the internal conductors in a single passage with a maximum diameter up to 12 mm in a simple and fast way. The operation of the MANUAL STRIPPING MACHINE D2 S is simple, after selecting the correct side of the 4-POSITION BLADES for the CABLE STRIPPING to be STRIPPED and adjusting the appropriate arm to determine the desired length of STRIPPING, just insert the cable in the appropriate guide and by pulling the lever of the MANUAL STRIPPING MACHINE D2 S, it is possible to obtain COMPLETE STRIPPING or PARTIAL STRIPPING quickly and easily and without damaging the copper strands. Furthermore, with the MANUAL STRIPPING MACHINE D2 S during the STRIPPING movement by means of an adjustment it is possible to STRIP the internal conductors of the STRIPPED CABLE by means of a block of STRIPPING BLADES without damaging the copper strands. The MANUAL STRIPPING MACHINE D2 S allow you to STRIPPING a wide range of diameters or if necessary quickly it is possible to replace them with another set of 4-POSITION BLADES to vary the range of possible STRIPPING diameters. The MANUAL STRIPPING MACHINE D2 S must be fixed to a workbench or to a flat surface. The MANUAL STRIPPING MACHINE D2 S does not need either an electric or pneumatic power supply for its operation. ALIMENTATION - No PNEUMATIC ALIMENTATION - No ABSORBIMENT - No STRIPPING LENGTH - 3÷170 mm WORKABLE CABLE - PVC-Teflon-Silicon-Similar MIN CABLE LENGTH - 250 mm + Strip TOLERANCE - <= 0,002 xL (L=Stripping Length) DISPLAY - No MEMORY - No WEIGHT - 5 Kg