Oil lubrication system TDM series

multi-linemechanical

The BEKA TDM-Series is a range of multi-line systems for oil lubrication used in all fields of mechanical engineering. Within the TDM-Series there are 2 pump types available, the TDM and the TDM-FS(U). The TDM-FS(U) has a higher output rate and lower drive speed, making this pump system more applicable for small diesel engines, compressors, vacuum pumps, tool machines, textile machines etc. The TDM is more commonly used for combustion engines, small compressors, textile- tool- and wood processing machines. System overview Set screws for output rate The piston stroke, and with that the output rate, can be adjusted with the set screw in the delivery piston under the pump lid or in the pump cover for the TDM-FS(U) pumps. Drive shaft The drive shaft puts the centrally positioned pump shaft and the cam disk with a gear into a rotating movement. This carries out the strokes of the delivery pistons. Outlets Pumps in the T-Series can be configured with up to 8 outlets with different hose connection types. Push to fit connectors provide an easy installation of the lubrication lines. Oil inlet The oil inlet is connected to an oil container via a hose. Different oil container sizes are available. Working principle Lubrication takes place only when the machine is running. The drive draft shaft puts the TDM-Series pump in motion. During the suction stroke oil is being taken from an external oil reservoir on the machine, which is being pumped to the lubrication points with the following piston stroke.