Water filter GENO® FM

cartridgefine

The GENO® fine filter FM (DN 150-DN 200) protects water installations in trade and industry. It is plastic-coated on the interior and exterior. The protective filter contains several filter elements, which are easy to replace. The basic equipment includes filter elements with 80 µm (0.08 mm); 50 µm, 100 µm and 500 µm can also be retrofitted. With the raw and pure water pressure gauge, the pressure remains under control. DN 150, 200 Max. water temperature 30°C Nominal pressure PN 10 bar Basic equipment filter elements 80 μm 50 μm, 100 μm and 500 μm can be retrofitted Installation requirements Please note local installation directives, general guidelines and technical specifications. The installation site must be frost-proof. Furthermore, a drain connection (floor drain) should be available. The filters should be installed in pipes of the same dimensions as the nominal diameters of the filters. Components mounted above the intended installation site of the filter must be installed at a sufficient distance in order to ensure the trouble-free replacement of the filters. In cases where the water supply must be maintained during the replacement of the filter element, either a filter with a lower flow rate must be installed in the bypass pipe or you are advised to switch 2 GENO® fine filters FM (each covering 50% of the max. flow capacity) in parallel. Scope of supply GENO® fine filter FME with two pressure gauges Aeration and deaeration as well as draining valve Counter flanges, screws and seals are not included in the scope of supply