Humidity test chamber BE-8209 series

temperaturesalt spray corrosionsalt spray

Relevant standards requirement 1. Test Object: battery pack andsystem. 2. Refer GB/T4 part 5.5.2 test method, test according to GT/T2423.17 test conditions. 3. The salt solution was made up with sodium chloride (chemically pure and analytically pure) and distilled or deionized water，Its concentration is (5 + 1)% (mass fraction). 4. (35 ± 2) ℃, the measured pH value is between 6.5-7.2. 5. Placed the test objects in the salt spray chamber for cycling test. Each cycling duration for 24h. Spray salt solution to the test object for 8 hours under the temperature of (35± 2) ℃ , remain for 16 hours. Between the forth and the fifth hour in one cycles should be according to test requirement in GB/T 28046.1-2011, test mode with 3.2. 6. Total 6 cycles testing. 7. Salt spray test is not necessary for the test objects being installed in passenger, luggage or cargo compartments. Technical Parameters: Product Name: Complex Salt Spray Test Chamber Max Load: 1000KG for battery pack Temp. Fluctuation: ±0.5℃ Temp. Deviation: 2℃ Spray Capacity: 1~2mL/80cm2/hr (Collect at least 16 hours, take the average ) Spray Pressure: 1.00±0.01kgf/cm² ResolutionTemp: 0.01℃, Humidity:0.01%R.H. Humidity Range: 30%–98%R.H. Control Mode : Touch screen programmable control PLC, networking; mobile phone APP alarm; with USB interface, with RJ485 interface can be connected to computer control, exclusive network control software. Remote monitoring and data acquisition. Internal material : Acid and alkali resistant SUS316 material External material : Cold and heat resistant steel plate with spray coating Cooling Mode : Air cooling / water cooling Total Weight : Approx 7 Tons