Temperature test chamber BTKS5 series

for rapid temperature cyclingfor the aeronautical industryEuropean standards-compliant

DGBell’s Temperature Cycling test chamber (also called the thermal cycling test chamber) is performed on materials to determine the resistance of exposure to alternating extremes of high and low temperatures. Test requirements: • IEC62133-2017 • UL1642 • UN38.3 Performance parameters: Cooling ModeAir-cooledAir-cooled: Air-cooledWater-cooledWater-cooled Humidity Range: 20%RH-98%RH (details see temperature humidity control diagram). Temperature Fluctuation: ±0.5℃ Humidity Fluctuation: ±2％RH Temperature Deviation: ≤2.0℃ Humidity Deviation: A)>75%RH:≤+2,-3%RH，B)<75%RH:≤±5%RH。 Temperature Uniformity: ≤±2.0℃ Humidity Uniformity: +2,-3%RH Heating Rate: From -40℃ to 85℃，full range non-linear average about 5℃/mins，no load Cooling rate: From 80℃ to -40℃ , full range non-linear average about 5℃/mins，no load Temperature Overshoot: ≤±2℃ Internal Material : 1.2mm thick SUS#304 temperature resistance stainless steel. External Material : Galvanized plate with Double-sided electrostatic powder coating. Control Mode : Touch screen programmable PLC, with USB interface, with RJ485 interface can be connected to computer controlling, special network control software, convenient remote monitoring, data acquisitioning. Compressor : Tecumseh (France)-fully air-cooled double-fall cooling compressor. Or Bock (Germany) semi-enclosed air-cooled refrigeration. Safety Protection : Explosion-proof pressure relief device, explosion-proof chain, mobile phone alarm device, networking, smoke exhaust device, fire extinguishing device, etc.